Fulton Boilers
Raven Supply has sold and supported Fulton boilers across British Columbia and the Yukon since 2014. Steam, hydronic, thermal fluid, and water heating all sit in the same catalogue, so one call covers every option instead of three.
Raven Supply Is Your Fulton Boiler Supplier in BC and the Yukon
Our technical sales team helps size the unit, works through venting and feedwater sizing and selections, and provides continued support long after the equipment ships. That matters on a boiler built to run for 25 years or more.
Why Choose Fulton Boilers
Vertical Tubeless Design With a Small Footprint
Fulton invented the vertical tubeless boiler in 1947, and it is still the reason most engineers specify the brand. The pressure vessel stands upright, so a VMP or VSRT takes up a fraction of the floor space a horizontal firetube unit needs. In retrofit work, where the new boiler has to fit the room you already have, that is often the deciding factor.
There are no tubes to pull and replace either. Less floor space, less downtime, lower installed cost.
High-Efficiency Condensing Technology
On the hydronic side, Fulton’s condensing boilers run stainless steel firetube heat exchangers built for variable primary flow. The Endura XE reaches up to 99% efficiency with turndown up to 15:1, using Flame-by-Wire combustion control and real-time O2 compensation to hold that efficiency as conditions shift.
High turndown is what keeps a boiler off the short-cycling treadmill through a mild Lower Mainland shoulder season.
Built and Backed by Fulton Boiler Works Since 1949
Lewis Palm built the first vertical tubeless boiler in 1947 and formed Fulton Boiler Works in 1949. The company still operates from Pulaski, New York, with more than 650 people across five countries. Over 100,000 vertical tubeless Classic steam boilers have shipped worldwide, and the FBS firetube line has passed 10,000 units in more than 40 countries.
Fulton Steam Boilers
Raven supplies Fulton steam boilers from 1 to 1,000 BHP in electric, natural gas, propane, dual fuel, #2 oil, and bio-fuel.
VMP and VSRT Vertical Tubeless Steam Boilers
40 to 150 BHP | 9.5 to 250 BHP
The VMP runs 40 to 150 BHP with a pressure vessel 30% thicker than ASME requires, fuel-to-steam efficiency up to 84%, steam quality above 99%, and linkageless controls with turndown to 8:1. A special 49.5 BHP version gets you maximum steam output without requiring an operator. A low NOx option comes in under 9 ppm on natural gas. Fulton backs it with a five-year warranty.
The VSRT covers 9.5 to 250 BHP and was the world’s first fully wetted, refractory-free vertical tubeless boiler when it launched in 2018. Its spiral rib heat exchanger pushes efficiency higher while keeping the smallest footprint in its class, and with no refractory, there is nothing to crack or re-line.
FBS Firetube and FBE and FBZ Electric Steam Boilers
60 to 1,000 BHP | 1 to 18 BHP | 90 to 2,000 kW
The FBS is the horizontal firetube workhorse, 60 to 1,000 BHP, factory-packaged with burner and controls, available in 3-pass and 4-pass designs at up to 82% efficiency. Tubes are seal-welded front and rear, the turnaround is fully water-backed so there is no rear refractory to maintain, and davited doors make inspections quick.
For sites moving off combustion, Fulton’s electric steam boilers hit near 100% efficiency with zero on-site emissions: the FBE at 1 to 18 BHP with a 100 PSI design pressure, and the FBZ from 90 to 2,000 kW with touchscreen controls, Modbus BMS integration, and horizontal element bundles for easier service.
Classic Steam and FBX Watertube
4 to 60 BHP | 30.5 to 920 BHP
The Classic has been in production for over 70 years. It runs 4 to 60 BHP at efficiencies up to 84%, with a Flue Gas Enhancing two-pass design that drops stack temperatures 100 to 150°F below standard units.
When the load outgrows the firetube, the FBX watertube handles 30.5 to 920 BHP in low and high-pressure steam, with customizable burner packages that meet every current emission standard.
Fulton Hydronic Boilers
Fulton hydronic boilers at Raven span 399,000 to 12,000,000 BTU/hr.
Endura, Endura+ and Endura XE Condensing Boilers
399,000 to 12,000,000 BTU/hr
Endura covers 750,000 to 2,000,000 BTU/hr with a fully wetted three-pass duplex stainless firetube exchanger, 19% stronger than standard stainless with 23% less thermal expansion, and NOx under 20 ppm. Its high water volume counter-flow design tolerates swinging system flow.
Endura+ scales up to 12,000,000 BTU/hr with a patent-pending stress reliever, turndown to 15:1.
Endura XE covers 399,000 to 6,000,000 BTU/hr, with a Type 439 stainless exchanger and a built-in buffer that cuts cycling.
Every model up to 6 MMBTU/hr fits through a standard doorway, and units mount with one inch of side clearance.
Vantage Condensing Boiler
2,000,000 to 6,000,000 BTU/hr
The Vantage handles 2,000,000 to 6,000,000 BTU/hr and is the one to look at when fuel security matters. It carries a duplex alloy stainless exchanger, ASME-certified vessel, and automatic fuel profile loading that switches to dual fuel or oil backup without an operator at the panel. It also survives zero-flow conditions without damage.
Fulton Thermal Fluid Heaters
Process heat above the practical limit of steam calls for thermal fluid. Raven carries five Fulton thermal fluid heaters from 74,000 to 20,000,000 BTU/hr.
FT-C | FT-A | FT-N
The FT-C is the four-pass fuel-fired unit, 800,000 to 14,000,000 BTU/hr, to 750°F, with modulating burners at up to 10:1 turndown. The FT-A is a compact vertical tubeless heater to 600°F, well suited to start-up or small batch production. The electric FT-N reaches 650°F using low-watt-density elements that keep film temperatures down and element life long, with Class I Div. I and Div. 2 control options.
Fulton Water Heaters
KESTAVA
750,000 to 2,000,000 BTU/hr
KESTAVA is a condensing tankless unit, 750,000 to 2,000,000 BTU/hr, with a duplex stainless exchanger, PURE control platform, and turndown to 15:1.
InTherm
Up to 90 GPM
InTherm is the indirect option, a double-wall plate and frame generator delivering up to 90 GPM and holding temperature within ±4°F through PID control and a modulating three-way valve. It pairs with a Fulton condensing boiler and removes large storage tanks from the design.
Fulton Boiler Parts, Manuals and Aftermarket Support
Parts
Raven supplies spare parts for boiler room equipment, including coils, burners, and gaskets. For Fulton parts, send us the model and serial number off the nameplate, and we will match it.
Manuals and Spec Sheets
Every Fulton product page on our site carries that model’s brochure and guide specifications as downloads. For full Fulton boiler manuals, installation and operation documents, or parts lists, including older units, contact our team.
Fulton Boiler Applications Across BC and the Yukon
Fulton builds for eleven industries. Most of these operations are located throughout BC and the Yukon, spanning from Victoria to Whitehorse.
- Agriculture
- Commercial and industrial facilities
- Education
- Food and beverage processing
- Gas and oil processing
- Government and military
- Healthcare
- Multifamily and hospitality
- Pharmaceutical and biotech
- Process manufacturing
- Utilities
Anything installed in BC has to clear Technical Safety BC. Boilers and pressure vessels need design registration under CSA B51 and a CRN before the installation permit is issued, and boiler plants need operating permits by class. We supply the manufacturer data reports your contractor needs for the submission.
FortisBC Rebates on Fulton Boilers
Many Fulton boiler models are eligible for FortisBC rebates. Depending on the boiler size and efficiency, qualifying high-efficiency natural gas boilers may be eligible for rebates of up to $45,000. Contact us to confirm which Fulton models currently qualify.
Why Buy Fulton From Raven Supply
More than a decade supplying Fulton into BC boiler rooms means we have built a reputation as a trusted boiler room specialist. We provide reliable, high-quality Fulton boiler solutions backed by the expertise to support complete systems, including venting, pumps, feedwater equipment, tanks, and controls. Our customers rely on us for coordinated solutions, technical knowledge, and responsive support from project planning through startup and beyond.
Frequently Asked Questions
Is Raven Supply an authorized Fulton boiler supplier?
Yes. Raven Supply is the authorized Fulton supplier for British Columbia and the Yukon, and has supplied the line to commercial and industrial customers across the region since 2014.
Which Fulton boiler models does Raven supply?
Raven supplies seven Fulton steam models from 1 to 1,000 BHP (VMP, VSRT, FBS, FBX, Classic, FBE, and FBZ), four condensing hydronic models from 399,000 to 12,000,000 BTU/hr (Endura, Endura+, Endura XE, and Vantage), five thermal fluid heaters from 74,000 to 20,000,000 BTU/hr, and the KESTAVA and InTherm water heaters. Availability changes, so call us for current lead times.
How much does a Fulton boiler cost?
Fulton boiler price depends on model, capacity, fuel, pressure rating, controls, and trim, so there is no list figure worth quoting. A 49.5 BHP VMP and a 1,000 BHP FBS are different orders of magnitude. Send us the load, fuel, and application, and we will quote the installed package.
Do Fulton boilers qualify for FortisBC rebates?
Some do. A gas-fired Fulton boiler at 90% thermal efficiency or better can qualify for up to $45,000 through FortisBC, but the program targets process heat applications and excludes space and domestic water heating. Confirm the specific model against the eligible commercial boiler list before purchase.
Where can I find Fulton boiler manuals and spec sheets?
Brochures and guide specifications sit on each product page on ravensupply.ca as downloads. For full installation and operation manuals, parts lists, or documentation on discontinued models, contact Raven with the model and serial number off the nameplate.
Can Raven supply Fulton boilers outside BC?
Raven’s territory is British Columbia and the Yukon, and that is where we sell, support, and service Fulton equipment. If your project sits outside that area, get in touch, and we will point you to the right Fulton representative.
Looking for more information about a specific Fulton product?
Contact our team for more information!